Skip to main content

 

 

THIRD BERNHARD SCHULTE OFFSHORE WIND VESSEL BEGINS FITOUT

Wednesday, September 25, 2019 

The Ulstein Verft yard in Norway says that construction of Bernhard Schulte’s third offshore wind vessel designed by Ulstein is now well underway.

Tasks such as steel outfitting, mechanical outfitting, electrical steel work, piping and insulation, have now commenced, and cable pulling will start within a few days.

Bernhard Schulte has previously (2016 and 2017) received two offshore wind vessels from Ulstein. The ship owner was the first to order and introduce to the market the novel X-Stern aft design, which improves the operational flexibility and work conditions for the ship’s crew at the offshore wind farms. With all main equipment and operations in the aft ship, the vessel will naturally operate astern while in-field.

The vessel number three from Ulstein is a larger-sized Service Operation Vessel of the design type SX195. The vessel measures 93.4m in length and 18m in the beam and can carry up to 120 people.

The design has been customised for the tender requirements of the charterer and the ship owner’s preferred mission equipment. It has a large, centrally positioned walk-to-work motion compensated gangway and lift tower for personnel and cargo transfers. Furthermore, a 3D compensated crane capable of 2-tonne cargo lifts is available. The optimised on-board logistics includes large storage capacities, of which half is under roof in a controlled environment, and stepless approach to the offshore installations.

In cooperation with the ship owner, Ulstein Design & Solutions has designed a diesel-electric propulsion system assisted by batteries to reduce operating hours on the main engines, save fuel and reduce environmental footprint.

Reader Comments (0)

There are currently no comments on this article. Why not be the first and leave your thoughts below.

Leave Your Comment

Please keep your comment on topic, any inappropriate comments may be removed.

Return to index

Web Analytics