Skip to main content

 

 

ArTEco PROJECT OPTIMISES THRUSTER OPERATIONS IN ICE

Sunday, October 7, 2018 

Project partners led by Finland’s VTT and Wärtsilä have developed new methods for optimising ship thrusters operating in arctic conditions.

Through the  ArTEco (Arctic Thruster Ecosystem) project, the consortium developed innovative technologies and solutions for mechanical and rotating propulsion systems in extreme ice conditions.  

While at sea, a ship must overcome tough resistance as it displaces water masses from its path. Ice creates extreme loads when the power of the ship's engine is directed through the ice by the propeller. Extreme loads wear the propulsion equipment, or thruster, thereby shortening the life cycle and reducing technical reliability. Limited operations or even equipment failure cause direct and indirect costs for owners, operators and equipment and component manufacturers

However, the three-year research explored a number of ways of optimising the design of propulsion equipment to enhance vessel capability when operating in these difficult conditions. Specifically, researchers found that thruster lifetimes can be increased, maintenance requirements reduced and reliability improved upon, particularly in extreme environments.

VTT developed and measured damping solutions for torsional vibrations, caused by issues such as the impact of propeller blades on ice.

"The results of the project can be applied on various vessels, icebreakers and the autonomous ships of the future, which will be able to operate in both non-arctic and arctic sea areas. The smart products and services of the future and new, competitiveness-boosting business opportunities will be created via the ecosystem projects. The best international research institutes in the field and industrial contributors were involved in the project," said Project Coordinator Jari Halme of VTT.

The project also involved the development of cutting-edge propeller simulation and load-specification methods, vibration damping solutions, environmentally friendly lubricants, measurement technology, and the improvement of the gear unit's load carrying capacity. These led to the creation of innovative, tested and reliable solutions. For example, changing external hubcap shapes reduced the maximum ice impact load by 30%, while a damper reduced vibration in the transmission by more than 20%. The results have been achieved in a full-scale testing environment. Similar measurements and testing have earlier never been done in this size and scale

"ArTEco has allowed us to increase the technology readiness level for several promising solutions for propulsion products. At Wärtsilä we are committed to innovation and are continuously working in different ways to provide better products for our customers." said Anders Hedin, Project Coordinator at Wärtsilä.
 
VTT and Wärtsilä coordinated the ArTEco project, in which the following organisations were also involved: ATA Gears, Katsa, the Finnish Transport Safety Agency, Tampere University of Technology, SKF, TU Luleå, Klingelnberg and TU Dresden. The main funders of the project are Business Finland in Finland, Sjöfartsverket in Sweden and state funding in Germany. The project is part of the European MARTEC II (Maritime Technologies as an ERA-NET).

Reader Comments (0)

There are currently no comments on this article. Why not be the first and leave your thoughts below.

Leave Your Comment

Please keep your comment on topic, any inappropriate comments may be removed.

Return to index

Web Analytics